When installing a TK application, mount the bases first before you try and configure the actual Tracker foot. Use reference points on the roof to determine equal measurement on both sides of the car, such as a seam in the track, a bolt hole, or the actual end of the track. Tighten the bases in to the track.
When installing the foot, slide the loadbar onto the foot. You may need to loosen the small allen key by pushing in the gray button and sliding downward on the plastic cover. This will expose the bolt so that it can be loosened.
With the towers loosely on the load bar, mount the towers into place on the TK bases that you?ve already tightened on the car. Once you?ve done this, measure equal distance of the loadbar that is extending beyond the foot, then tighten the small allen bolt. Depress the gray button and pull up on the foot to be sure it is seated on the base properly. |
